Non-CNC Busbar Punching Bending Cutting Machine JPMX-303CM

Non-CNC Busbar Punching Bending Cutting Machine JPMX-303CM

1.Three working units:

A.Punching unit:

1) United six-dies turn-plate structure, make sure the upper die and the lower die are absolutely in the center.

2) 6 punching dies can punch 6 kinds of holes, no need to replace the dies frequently.

3) Three location modes: locating pin, locating ruler and LED light.

4) No pressing mark on the workpiece surface.

5) Can punch non-standard holes with special dies, for example, square hole, oval hole etc.

6) 2 limit switches. (foot switch & press button). 

                                                           Punching unit                                                                        Punching dies

B.Cutting unit:

1) Use sharp shearing, flat incision interface, no droops, no burrs, no waste.

2) Two pressure type to make sure no apex angle.

3) 2 limit switches. (foot switch & press button).

                                                Cutting unit                                                                      Cutting blade

C. Bending Unit:

Because of only one motor,three working units(punching,cutting,bending units) can't work at the same time.Bending unit can complete horizontal bending,vertical bending,U bending by replacing the processing  dies.

1) Horizontal bending.(2 sets horizontal bending dies).The price included in the machine price.

2) Vertical bending. (2 sets vertical bending dies).The price included in the machine price.

3) U bending (1 set).The price included in the machine price.

                                      Horizontal bending                                                          Horizontal bending dies

                                          Vertical bending                                                                   Vertical bending dies

                                                     U-bending                                                                               U-bending die

2.Main advantages:

1) Turret rotate punch, no need change dies, high efficiency, save time.

2) Cutting without any waste, save busbar. cutting adge very flat.

3) The machine has 4 foot-wheels, easy to move.

4) There are two operating modes: manual button and foot switch, which is simply operated.

3.Processed copper busbar samples:

4.Configuration list:

8 sets of punching die                                                      1 set of shearing blade

2 sets of horizontal bending dies                                       2 sets of vertical bending dies

1 set of U bending die                                                        3 sets of foot switches

1 set of oil filler                                                                   1 set of inner hexagon spanner

1 set of hydraulic system sealing ring                                1 set of random tools    
2 pieces of Limit Switch                                                     1 piece punching location needle

5.Main components:

1)AC contactor, thermal relay, circuit breaker (Schneider):

2)Directional valve & Relief valve  ( Yuken ):

6.Packing:

7.Certifications:CE & ISO9001:

8.Workshop:

9.Contacting:

If you have any concern about our products,you are welcome to come to visit our factory to inspect the machine.Waiting for your kindly inquiry!